Choosing lighting fixtures for home decoration is also very important. For example, some homeowners choose tube lamps in their homes. How to install the downlights?
1、 How to install tube lights
1. Before installing the tube lamp, you need to determine the size according to its instructions in order to make holes on the ceiling.
Next, use a measuring device to make a mark on the ceiling. Generally speaking, it is circular, and you can use an electric drill to drill holes in the ceiling.
There is still a lot of attention to detail, otherwise improper operation can easily damage the ceiling.
Therefore, if you are not proficient in the method, you can ask a professional technician to install it.
2. Next, it is necessary to connect the power cord inside the ceiling of the chandelier to the downlight according to the wiring requirements, adjust the nut inside the downlight, and have a fixed spring plate.
The height of the spring plate should be the same as the thickness of the ceiling.
3. Place the spring buckles into the already opened ceiling, and then unfold the spring buckles on both sides, just behind them.
4. The final step of installing the light bulb is to complete the entire installation process of the tube lamp.
After the light bulb is installed, turn it on to check if it can light up.
2、 How to disassemble the tube lamp
1. If you want to disassemble the tube lamp, the first step is to turn off the power to ensure our personal safety during the disassembly process.
Remove the light bulb by rotating it counterclockwise.
2. After disassembling, keep the light bulb safe.
Through installation, it was found that it is a spring clip and hook type fixing method. So we first need to pull down the spring clips on both sides to remove the tube lamp.
3. Next, disconnect the wiring between the tube lamp and the power supply. If a new tube lamp needs to be replaced, the power cord needs to be reconnected.
The AC220V power supply needs to be connected, and the spring clips on both sides need to be securely fastened.
The above content specifically introduces how to install the downlights and how to disassemble and replace them.
It is important to pay attention to electrical safety and ensure standardized circuit connections.
If you are not familiar with this, you can ask a professional lamp installation technician to come and help.