Today’s chandeliers are not just a lighting fixture,
but they are also interior decorations, and the install a chandelier is not that easy.
For this reason, j&s lighting furniture installers have recorded the entire process of installing chandeliers, so those who want to install chandeliers can learn!
1.Open the package and inspect the parts according to the instructions.
Because chandeliers are lighting fixtures and decorative lights, they also contain many accessories.
It’s not very familiar. New installers can check the parts according to the bulb’s installation instructions.
If you find the wrong place, you can contact the merchant in time.
If the lighting installation host is unpacked, the customer must be present, and installation can only be guaranteed if there are no problems with the lighting.
2.Installation of chandelier
1.First assemble the lamp body of the chandelier and the surrounding lamp arms (where the lamp is installed).
2.After disassembling the light body strip as shown in the picture above, you can see where the light arms can be connected.
After connecting the lamp arms, the lamp arms must be fixed one by one with a wrench. After installation, the lamp arms need to be evenly distributed, otherwise the installation is complete. The chandelier will be tilted towards the heavier side of the arm.
3.Connect the various wires on the lamp arm correctly. Don’t connect the wrong one. Otherwise, if a light bulb is installed, it is found that one of the light arms does not light up and needs to be removed for maintenance.
4.Installed the slings and slings of the lamp body and chandelier. At this point, the chandelier is basically assembled and then the base (i.e. top plate) is installed.
5.Install the ceiling lamp holder at the determined installation position.
The installation method is similar to that of a ceiling lamp. First, press the lamp holder on the hole to pull out the hole, then use a drill to drill and install the expansion screw. Fix the lamp holder.
6.Connect the main power supply reserved for the ceiling to the chandelier power supply.
7.Then adjust the assembly height of the chandelier and assemble the accessories (glass bowl and shell) above the arm.
8.Finally, install the decorative cover (that is, the cover on the base), and then turn on the test power supply to see if the chandelier starts normally.
There are also some things you must pay attention to:
Fix chandelier on ceiling hole
The first install a chandelier method is embedded: first install a metal sheet slot on the ceiling, then fix several protruding brackets on the back of the LED panel light, and then put the panel light into the bracket to match the metal sheet slot on the ceiling. It can be fixed to the ceiling. However, due to the different thickness of the ceiling, the height between the light surface and the bracket needs to be adjusted, otherwise the LED panel light will be higher or lower than the ceiling surface after installation.
The second installation method is fixed: first install a few screw holes on the ceiling, then slide the LED panel light into the ceiling frame and install it on the ceiling to fix the three sides. The panel light is then slid into the fixed slide-in mounting frame and the fourth side is mounted to the screw-mounted frame. Convenient and simple.
The third installation method is the wire hanging type: first fix the hanging wire installation part on the ceiling and lock the screws (the hanging wire has been installed at the factory.) The hanging wire is vertical, and the components are suspended from the back LED panel light. Easy to install and save. Consumers must be careful to ask whether the suspension components are standard components or optional components.
Installation Precautions:
- The product uses standard working voltage, please do not exceed the working voltage range;
- Please make sure the power is turned off before installation;
- Please read the instructions carefully before installing the product;
- Pay attention to waterproof, electricity-proof and shock-proof;
- This product is for indoor use only.
How to install a chandelier with integrated ceiling?
- Decorate the connection device on wooden bricks and iron parts to adjust the error of the chandelier according to the error. It can be welded, nailed, screwed, etc. After completing these steps, the chandelier installation is almost complete.
- Take the installation height of the chandelier in the living room as an example, choose the installation position of the chandelier to avoid embedded wires in the ceiling;
- Pre-embed the decorative materials into the structural layer, accurately embed the position, and retain certain positions of the chandelier for adjustment;
- You need to connect slings, booms and connecting devices.
the last point:
It is really not recommended to install chandeliers in ordinary commercial houses, especially those with low floor heights.
Most of the chandeliers on the market currently emit light upward, and it is recommended to use them with downlights or spotlights, so that they become a traditional ceiling mode.
Currently, many chandeliers use GU10 series light bulbs as their light sources, which are very powerful, cannot dissipate heat, and are prone to breakage. The traditional E27 or E14 requires a larger lamp head and lampshade, which feels a bit low.
It is recommended to install a chandelier, which is convenient and practical. Of course, it can also adjust the light and color temperature.